Overview Of The Components; Before Using For The First Time - Ciatronic ES 2999 Instrucciones De Servicio

• Make sure that the boiler lid and the fi lter holder are properly and securely
closed while using the machine since this machine is pressurized when opera-
ting.
• Use only water to fi ll the boiler. Do not use any other liquid!
• If diffi culties are encountered when unscrewing the boiler lid, this may indicate
that the machine is still pressurized. Let out the pressure with the procedure
described above.
1 Boiler lid
2 Boiler tank opening
3 Control selector
4 „Ready" lamp
5 Display
6 Brewing head
Illustration 1
A Open
B Closed
Symbols on the Switch
Off
In order to remove all the dust that has deposited during the packing, wash the
glass pot, the fi lter shell, the fi lter holder and the drip collection tray with warm
soapy water. Do not use coarse or sharp cleansing agents. Wipe the base with a
clean and humid towel.
Follow carefully the Safety Instructions!
It is highly recommended to carry out a complete brewing cycle as described in
„Espresso Preparation" without any coffee powder before making your fi rst cup of
espresso or cappuccino. By doing so, any residual dust left inside the espresso
machine will be removed. The preparation of an espresso or cappuccino is diffe-
rent from that required for a normal cup of coffee. Both espressos and cappuc-
cinos are made by pressing boiling water under pressure through fi nely ground
coffee. Great attention is needed and it is highly recommended to read carefully all
the instructions and safety indications provided herein, before brewing.
05-ES 2999 Skala 53

Overview of the Components

7 Filter bowl
8 Filter holder
9 Filter catch
10 Spoon
11 Tray
12 Drop grid
– Handle position for the insertion of the fi lter unit
– Handle position for the use of the fi lter unit
Brew
Before using for the fi rst time
13 Glass pot
14 Lid
15 Thermometer
16 Vapor jet
Release Steam
09.12.2005, 8:49:30 Uhr
GB
53