2.3 Technical data
Universal motor, radio and TV interference
suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed during idling
Saw blade speed at normal load
Cutting depth 0°/30°/45°
Swivelling saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, without parallel guide fence
Dimensions (W x L x H)
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Sound power level
Idling
102 dB (A)
Machining
103 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2.6 Scope of supply
Portable circular saw KSP 40 FLEXISTEM complete with:
1 carbide - tipped circular saw blade Ø 120 mm ( 4 47/64 in. ), 24 teeth
1 riving knife / splitter (thickness 1.2 mm / 3/64 in.)
1 hose connector
1 parallel guide fence
1 connecting cable
1 service tool in bracket on the machine
1 carrying case Max
1 operating manual
1 folder "Safety Instructions"
2 clamping claws
1 FLEXI rail FX 140 for cutting length max. 140 cm (55 in.)
230 V~, 50 Hz or 110 V~, 50 Hz
900 W (230 V) or 1000 W (110 V)
4.1 A (230 V) or 9.1 A (110 V)
8800 rpm
6500 rpm or 5690 rpm
42/36/29 mm ( 1 21/32, 1 27/64, 1 9/64 in. )
0 – 45°
120/112 mm ( 4 47/64, 4 13/32 in. )
1.2 mm ( 3/64 in. )
1,8 mm ( 5/64 in. )
20 mm
28 mm ( 1 7/64 in. )
2.3 kg ( 5.1 lbs )
181 x 306 x 199 mm ( 7 1/8 x 12 x 7 13/16 in. )
Workplace-related emission value
91 dB (A)
92 dB (A)
2
.
-17-