JUKI LZ-271 Manual De Instrucciones página 35

Precautions to be taken so as
to use the LZ-271 more safely
1. Keep your hands away from needle when you turn ON the power switch or while the
machine is in operation.
2. Do not put your fingers into the thread take-up cover while the machine is operating.
3. Turn OFF the power switch and ascertain that the motor has stopped running before
starting the work when tilting the machine head, or removing the belt cover or the V
belt.
4. During operation, be careful not to allow your or any other person's head, hands or
clothes to come close to the handwheel, V belt and motor. Also, do not place any-
thing close to them.
5. Do not operate your machine with the belt cover and finger guard removed.
6. When tilting the machine head, be sure to confirm that the head support bar is prop-
erly attached to your machine head, and be careful not to allow your fingers or the
like to be pinched in the machine head.
1. To ensure safety, never operate the machine with the ground wire for the power supply
removed.
2. When inserting/removing the power plug, the power switch has to be turned OFF in
advance.
3. In time of thunder and lightening, stop your work and disconnect the power plug
from the receptacle so as to ensure safety.
4. If the machine is suddenly moved from a cold place to a warm place, dew condensa-
tion may be observed. In this case, turn ON the power to the machine after you have
confirmed that there is no danger of water drops in the machine.
5. To prevent fires, periodically draw out the power plug from the plug socket and clean
the root of the pins and the space between pins.
6. The hook rotates at a high speed while the machine is in operation.
To prevent possible injury to hands, be sure to keep your hands away from the vicin-
ity of the hook during operation. In addition, be sure to turn OFF the power to the
machine when replacing the bobbin.
7. To avoid possible accidents due to abrupt start of the machine, be sure to turn OFF
the power to the machine.
8. Be careful of handling this product so as not to pour water or oil, shock by dropping,
and the like since this product is a precision instrument.
9. When tilting or returning the sewing machine to the home position, hold the upper
side of the machine head with both hands and perform the work quietly so that fin-
gers or the like are not caught in the machine.