Setting Reflected-Light Illumination; Integrated Vertical Illuminator - Zeiss Stemi 305 Instrucciones De Manejo

ZEISS
Fig. 20 Setting the vertical illuminator
When mixing both reflected-light illuminators, the intensity of the additionally installed
reflected-light illuminator (spot illuminator, double-spot illuminator, ring illuminator, etc.) is
adopted. In this case, only the vertical illumination is adjusted by turning the knob.
Now, the required intensity of the vertical light is blended in with the reflected-light
illuminator.
24
OPERATION

Setting reflected-light illumination

4.2
4.2.1
Each Stemi 305 body features a vertical illuminator
of its own.
If no second reflected-light illumination has been
installed, the vertical illuminator is operated as
described below:
•
Press the knob (Fig. 20/1) once to switch the
vertical illuminator (Fig. 20/2) alternately ON or
OFF.
•
Turning of the knob serves to adjust the
illumination intensity.
If a second reflected-light illumination has been
installed,
operated as described below:
•
Press the knob successively to set four
illumination states:
1. Press: to switch the vertical illumination
2. Press: to switch the second reflected-light
3. Press: to switch both reflected-light
4. Press: to switch both reflected-light
•
By turning the knob, the illumination intensity
of the switched-ON reflected-light illuminator
can be adjusted.
435063-7044-010
Setting reflected-light illumination

Integrated vertical illuminator

the reflected-light
ON.
illuminator ON (vertical illumination
OFF).
illuminators ON.
illuminators OFF.
Stereo microscope
Stemi 305
illuminators are
04/2015