Etac Turner PRO Manual De Usuario página 5

Technical data
Safe Working Load (SWL):
200 kg (441 lbs)
Weight of unit:
8kg
Dimensions:
Height(A): 0,8-1,2 m
Height (B): 0,3-0,55 m
Depht (C): 0,46 m
With (D): 0,45 m
Footplate (Ø): 0,40 m
C
D
A min
B max
Supplied parts
1x 1x
1x 1x
1x
1x
1x 1x
1x
Outer pole
Inner pole with handle
1x
1x
1x
Main plate
Material:
Powder coated aluminum,
Plastic, Steel.
Expected Lifetime:
The Turner PRO has an
expected lifetime of 5
years or 15000 turning cycles
Ø
A max
B min
Allen key
1x 1x
Turning knob
1x 1x
1x
Screws
3x
3x
User manual
1x
1x
1x 1x
1x
3x
Leg support
1x
1x
1x
Mounting leg support
The knee cushions are adjusted individually. The leg support has step-less
adjustment from 0,3 to 0,55 meters. Follow these two steps when
mounting the leg support:
1
Lay the pole down on an even surface.
Insert leg support with kneepads
pointing upwards. Make sure both knobs
are on the same side.
Mounting pole to main plate
1
Place the base plate on an
even surface. Insert pole
with knee pads facing
away from the wheels.
Make sure that all three bolts are properly
fastened. Loose bolts can make the pole
wobbly and the Turner PRO unsafe to use.
Mounting handle
1x
The handle has step-less adjustment from 0,8 to 1,2 meters.
Follow these three steps when mounting the handle:
1
1x
3x
1x
1x
Place the handle
1x
with the lock-pin
pointing towards
3x
the wheels.
5
1x
Etac Turner PRO / www.etac.com
2
Tighten knob by turning
knob clockwise.
2
Insert all three screws into holes in the base
plate. Use allen key to screw in bolts. Tighten
bolts firmly.
2 3
CLICK!
Press in the lock pin There will be a clicking sound
and slide the pole when it is correctly mounted.
into the mounted Turn and tighten the knob.
pole.
CLICK!
CLICK!