Características Técnicas - SMAR LD301 Manual De Instrucciones, Operacion Y Mantenmiento

Sección 6
Fluido del Proceso Liquido, gas o vapor.
4.20 mA a dos hilos, controlado de acuerdo a las especificaciones de NAMUR NE43 y con comunicación digital
Señal de Salida
sobrepuesta (Protocolo HART ). Observe la siguiente figura.
Alimentación 12 a 45 Vdc.
Opcional de 4½ dígitos numéricos e indicador alfanumérico de 5 caracteres con indicador LCD.
Indicador
Certificados de Intrínsecamente seguro (FM, CSA, NEMKO, EXAM, CEPEL, NEPSI), a prueba de explosión (FM, CSA,
Area Peligrosa NEMKO, CEPEL, NEPSI), a prueba en polvo (FM) y no inflamables (FM). Ver Apendice A.
Authorized representative in European Community
Smar Gmbh-Rheingaustrasse 9-55545 Bad Kreuzanach
PED Directive (97/23/EC) – Pressure Equipment Directive
This product is in compliance with the directive and it was designed and manufactured in accordance with
sound engineering practice using several standards from ANSI, ASTM, DIN and JIS.
EMC Directive (2004/108/EC) - Eletromagnetic Compatibility
The EMC test was performed according to IEC standard: IEC61326-1:2006, IEC61326-2-3:2006, IEC61000-6-
4:2006, IEC61000-6-2:2005. For use in environment only.
Keep the shield insulated at the instrument side, connecting the other one to the ground if necessary to use
Información de
shielded cable.
La Directiva
Europea
ATEX Directive (94/9/EC) – Equipment and protective systems intended for use in potentially explosive
atmospheres.
This product was certified according European Standards at NEMKO and EXAM (old DMT). The certified body
for manufacturing quality assessment is EXAM (number 0158).
LVD Directive 2006/95/EC – Electrical Equipment designed for use within certain voltage limits
According the LVD directive Annex II the equipment under ATEX "Electrical equipment for use in an explosive
atmosphere" directive are excluded from scope from this directive.
The EC declarations of conformity for all applicable European directives for this product can be found at
www.smar.com.
Ajustes de Cero y
No interactivo, vía comunicación digital.
Span y Ajuste
Jumper local ajustable en tres posiciones: simple, inhabilitado y completo.
Local
Limitacíon de
Carga
CARACTERÍSTICAS TÉCNICAS
Especificaciones Funcionales
6.1