Compressed Air Connection - Corghi Erco X5000 CT LT PT2 FAST Manual De Uso

To make the pneumatic connections between the lift and the control unit, proceed as
follows:
1. Remove the control unit door by unscrewing the 4 fixing screws.
3. Extract the pneumatic pipes under the main lift runways.
4. Connect the pneumatic pipes to the pressure regulator, by following the numbers
indicated in figure 9.
3. Connect the compressed air supply to the screw connection provided, shown in
figure 9.
9
10
10
62

Compressed air connection

7
7
Operator's manual ERCO X5000 CT LT PT2 FAST
2
2
4
5
5