Changing Batteries - Eschenbach System VarioPLUS Manual De Instrucciones

Ocultar thumbs Ver también para System VarioPLUS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
1599144: If you do not like the colour of the light, your optician can adjust
the light colour with the supplied coloured LED-Caps.
Lamp bulb replacement
Models with bulbs only (159910):
X Switch off the illuminated magnifier by pushing the switch [3] back
towards the end.
X Pull the handle (159910) out of the lens barrel.
X Change the defective bulb for a new one.
X Only use bulbs specified (2,5 V, 250 mA).
X Insert the handle straight into the lens barrel. Ensure that the sup-
port [1] is pointing downwards.

Changing batteries

All of the batteries (2 alkali-manganese batteries, C-size) should always
be replaced. Pay attention to the correct polarity (positive pole in the
direction of the light).
X Switch the illuminated magnifier off by sliding the switch e to the
rear.
X Turn the grey end cap y anticlockwise and then remove the end cap.
X Replace the old batteries t with new ones.
X Screw the grey end cap back into the handle.
X Insert the handle straight into the magnifier pot.
Ensure that the slot in the rear end cap points down.
Magnifier pots with valuable extra function
Pivoting reading line i as an orientation guide
The following magnifier pots have this function:
ø 80, 12 Diopter, 3.0 x
X Turn the lever o to swing in the orientation guide.
Pivotable additional magnification a of 4 Diopter.
To read small print or to highlight difficult passages of text.
The following magnifier pots have this function:
100x50, 7.6 Diopter, 3.0 x
X Turn the lever s to swing in the additional magnification.
ø 70, 16 Diopter, 4.0 x
- 8 -
ø 58, 20 Diopter, 5.0 x
100x75. 7.0 Diopter, 2.8 x

Publicidad

Tabla de contenido
loading

Tabla de contenido