Forward-Facing Installation; Lap-Shoulder Belt Installation - Britax BOULEVARD CLICKTIGHT Guia Del Usuario

BRITAX Child Safety, Inc.

Forward-Facing Installation

Lap-Shoulder Belt Installation

1. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
2. Recline the unoccupied
child seat and place
forward-facing on the
vehicle seat. Ensure that
the base of the child seat
is flat on the vehicle seat
and no more than 3 in.
(7.6 cm) of the base hangs
over the edge of the
vehicle seat (see page 27).
3. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
4. Slide both parts of the
vehicle belt into the
forward-facing belt slots.
5. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
14
3a
3b
6a
6b
BOULEVARD CLICKTIGHT User Guide
7. Close the CLICKTIGHT.
– A click confirms the
CLICKTIGHT is secure.
8. Attach the tether to a
designated anchor (see
vehicle owner's manual)
and remove slack (see
page 30).
Forward-Facing Installation with Lap-Shoulder Belt
9 Ensure that the logo on the CLICKTIGHT dial has
returned to a horizontal position.
9 Check that all connections are secure and straps are
not twisted.
9 Ensure that the ball in the recline indicator is within the
allowable green section and that no more than 3 in.
(7.6 cm) of the base hangs over the edge of the vehicle
seat (see page 27).
9 Check that the child seat cannot be moved front to
back or side to side more than 1 in. (2.5 cm) at the belt
path. If the child seat is not secure, repeat installation
or use a different seating location.
9 Check that any excess tether webbing is contained
within your vehicle and secured in the elastic strap.
15