Britax BOULEVARD CLICKTIGHT Guia Del Usuario página 18

BRITAX Child Safety, Inc.
Using the Tether
IMPORTANT: Do not use the top tether strap with rear-
facing installations. To improve rear-facing performance
of this child seat an anti-rebound bar can be purchased at
www.BritaxUSA.com.
To attach the tether to a tether anchor:
1. Firmly press the hook over
the tether anchor point.
2. Pull the loose end of the
webbing to remove slack
from the tether.
NOTE: If the tether is
too short for use in your
vehicle, contact BRITAX
Consumer Services at
1-888-427-4829 or 1-704-
409-1699 to obtain a tether
extender.
To remove the tether from a tether anchor:
1. Loosen the tether.
a. Tilt the lock up.
b. Pull the tether webbing.
2. Remove the tether hook
from the tether anchor.
NOTE: Store the tether in the tether compartment when
not in use and ensure the tether compartment door is
fully closed.
30
a
b
BOULEVARD CLICKTIGHT User Guide
The Tether as a Crash Indicator
The tether can indicate when the child seat has been in a
moderate or severe crash (see "Important Notes" on page 5)
and replacement of the child seat is necessary.
Figure 1 shows a tether
acceptable for continued use
(provided the child seat has
not been involved in a crash).
The colored stitching will be
intact and not visible from the
back of the seat.
Figure 2 shows examples
of when the tether has been
damaged and is unacceptable
for continued use. If one or
both of the loops have pulled
through the back of the shell
and/or any of the colored
stitching has ripped, the child
seat is no longer acceptable
for use.
IMPORTANT: Discontinue use of child seat if it has been
involved in a moderate or severe crash, regardless of
whether the loops have pulled through the back side of the
shell and the colored stitching has been ripped.
1
or
2
31