Rear-Facing Installation; Lap-Shoulder Belt Installation - Britax BOULEVARD CLICKTIGHT Guia Del Usuario

BRITAX Child Safety, Inc.

Rear-Facing Installation

Lap-Shoulder Belt Installation

1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT
dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Recline the unoccupied
child seat and place rear
facing on the vehicle seat
(see page 26).
3. Slide both parts of the
vehicle belt into the rear-
facing belt slots.
4. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
5. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
6. Close the CLICKTIGHT.
– A click confirms the
CLICKTIGHT is secure.
8
1a
1b
5b
5a
BOULEVARD CLICKTIGHT User Guide
Rear-Facing Installation with Lap-Shoulder Belt
9 Ensure that the logo on the CLICKTIGHT dial has
returned to a horizontal position.
9 Ensure that the ball in the recline indicator is within
the allowable blue section for the size of the child (see
page 26).
9 Check that all connections are secure and straps are
not twisted.
9 Check that the child seat cannot be moved front to
back or side to side more than 1 in. (2.5 cm) at the belt
path. If the child seat is not secure, repeat installation
or use a different seating location.
9