Medela Invia Motion Instrucciones De Uso página 18

Make sure the correct canister is used:
Contact your healthcare professional if the correct canister is
not available.
8. Remove the new canister/tubing set from the packaging and
attach it to the Invia Motion NPWT pump by pressing the canis-
ter to the Invia Motion NPWT pump (1) and rotating to the right
(2). Make sure the canister is aligned with the label to the front.
9. Connect the Invia Motion tubing connector to the wound drain
tubing. Push together until you hear a click.
10. Open the clamp on the dressing tubing. Also make sure the
clamp on the pump tubing is open.
11. Switch the Invia Motion NPWT pump on by pressing the
button. Slide the Invia Motion NPWT pump into the carrying
case.
12. Discard the used canister/tubing set according to instructions
provided by your healthcare professional.
18
087.4016.