Microlife BP 3ABO-H Instrucciones De Uso página 12

The device frequently fails to measure the blood
pressure values, or the values measured are too
low (too high).
Every measurement results in different values,
although the device functions normally and normal
values are displayed.
The blood pressure values measured differ form
those measured by the doctor
Further information
Blood pressure is subject to fluctuations even with healthy people. Comparable
measurements always require the same conditions (Quiet conditions)!
If fluctuations are larger than 15 mmHg, and/or you hear irregular pulse tones on several
occasions, please consult your doctor.
For licensing, this device has been subjected to strict clinical tests, by experienced doctors
in Germany.
The manufacture of this device takes place according to the terms of the European
standard for blood pressure measuring devices (see technical data) under the supervision
of the Technical Monitoring Association Essen (RWTüV-Essen).
Contact microlife if there are technical problems with your blood pressure monitor. Never
attempt to repair the instrument yourself!
Any unauthorised opening of the instrument invalidates all warranty claims!
1. Fit the cuff correctly on the arm.
2. Before starting a measurement
make sure that the cuff is not fitted
too tightly. Ensure clothing is not
exerting pressure on the arm above
the measuring position. Take off
articles of clothing if necessary.
3. Measure blood pressure again in
complete peace and quiet.
• Blood pressure changes
continually. Your readings may be
accurate. Consult your doctor.
• Record the daily development of the
values and consult your doctor
about them.
• Anxiety during a doctor visit can
result in higher readings.
11