Inserting The Batteries - Microlife BP 3ABO-H Instrucciones De Uso

3. Components of the blood-pressure monitor
a) Measuring unit
T Connector
b) Cuff:
Regular cuff (model # S102-m) for arm circumference 9-13"
Large cuff for arm circumference 13-17" (available as special accessory)
4. Operation of your blood pressure monitor.

4.1. Inserting the batteries

After you have unpacked your device, insert the
batteries. The battery compartment is located on the
underside of the device (see illustration).
a) Remove the battery cover.
b) Insert the batteries (4 x size AA 1.5 V), following
the indicated polarity.
c) If the battery warning appears in the display, the
batteries are discharged and must be replaced
with new ones.
Attention!
• After the battery warning appears, the device is
blocked until the batteries have been replaced.
• Please use «AA» Long-Life or Alkaline 1.5 V
Batteries. The use of rechargeable batteries is
not recommended.
Systolic
Diastolic
Pulse
ON/OFF
Memory button
Quick release
valve
Pumping bulb
Cuff
Low
battery
indicator
5