Cleaning And Maintaining The Lcd Monitor; Guarantee; Disposal - Waeco PerfectView LCD250 Instrucciones De Montaje Y De Uso

Sistema de vídeo de marcha atrás
Ocultar thumbs Ver también para PerfectView LCD250:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65
_RV-250.book Seite 45 Donnerstag, 14. Dezember 2006 4:54 16

Cleaning and maintaining the LCD monitor

8.6
Selecting the camera
If you switch from camera 1 to camera 2 or vice versa, press the "C1/C2" button
(0 2, page 6).
The monitor switches from camera 1 to camera 2 or vice-versa.
If you have connected the green cable to the reversing light and it is
electrically charged, camera 2 will be activated automatically.
9
Cleaning and maintaining the LCD monitor
Caution!
Do not use sharp or hard objects for cleaning as these may damage the
monitor.
Remove the cable before cleaning the monitor to prevent short circuiting.
Clean the monitor with a soft, damp cloth from time to time.
10

Guarantee

Our general guarantee conditions apply. If the product is defective, please return it to the
WAECO branch in your country (see the back of the instruction manual for the addresses)
or to your dealer. For repair and guarantee processing, please include the following
documents when you send the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
11

Disposal

Place the packaging material in the appropriate recycling waste bins wherever
possible.
If you need to scrap the device, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
45
PerfectView LCD250

Publicidad

Tabla de contenido
loading

Tabla de contenido