Single Post Height Adjustable Armrests; Padded Swing-Away Armrests; Seat Sling Adjustment; Ultra Light Seat Sling - Quickie Q7 Manual De Instrucciones

E NG LIS H
I. SINGLE POST HEIGHT-ADJUSTABLE ARMRESTS (OPTION)
Sunrise medical offers several different types of armrests. Fixed, swing-away, and Flip-back armrests. Swing-away
armrests can be detached or can swing away to allow lateral transfers. They are height adjustable (1" increments)
by squeezing the adjustment trigger and moving (4) up or down to the desired height.
1. Basic Installation
a. Slide the outer armpost(1) into the receiver (7) mounted to the wheelchair frame.
b. The armrest should lock into place.
2. Height Adjustment
a. Release the upper securing lever. (2)
b. Slide armpad (4) up or down to desired height.
c. Return lever to locked position.
3. Replacing Armrest
a. Slide armrest back into receiver.
b. Return release lever (2) to locked position against armpost
J. PADDED SWING-AWAY ARMRESTS (OPTION)
1. Installation
a. Depress button (A) and hold down
b. Slide the armrest into the receiver tube (B) on rear of frame.
2. Swinging Away
a. Lift armrest out of the locked position and rotate to the side
3. Removing Armrest
a. Pull armrest straight out of the receiver.
K. SEAT SLING ADJUSTMENT
Remove the screws retaining the left side seat sling. Readjust VELCRO®-style material to increase
the tension in the seat sling. Replace screws. If there is any difficulty in reattaching the screws, try
using a probe to help align the holes. Ensure that the plastic saddles are under the seat rail in all fas-
tener positions.
L. ULTRA LIGHT SEAT SLING
The Ultra Light Seat Sling may be removed by first loosening the Velcro strap (C) on both the front
and rear of the seat upholstery cover ( E). Then proceed by loosening all Velcro straps (D) that
encircle the chair frame. All straps must be reinstalled in the same position and quantity as the origi-
nal set-up.
M. CUSHION INSTALLATION (OPTION)
Place cushion on seat sling with VELCRO® side down. The beveled edge of the cushion should be in
front. Press firmly into place.
16
17
18
VIII. USE AND MAINTENANCE
15
17
4 15
6
5
2
1
3
9
7
1. Outer armpost
2. Height Release
Lever
3. Release lever
4. Armrest pad
5. Transfer bar
6. Side panel
7. Receiver
8. Clamp
9. Receiver adjustment
hardware
10. Clamp bolts
16
17
18
E
112786 Rev. F