Replacing The Halogen Lamp/Led - Dentsply Sirona Midwest Stylus Plus Manual Del Operador

Operating instructions Midwest Stylus Plus / Midwest Tradition
A
67 27 148 D3673.201.09.01.02
8.2.3

Replacing the halogen lamp/LED

CAUTION! The lamp can be hot. Risk of burns! Allow the lamp
to cool down.
1.
Remove the high-speed handpiece.
B
2. Unscrew the cap (B).
3. Remove the defective halogen lamp/LED (A).
4. Insert the new halogen lamp/LED. Ensure the proper position
of the contact surfaces.
NOTE! Pressing on the lens can destroy the LED. Use the
assembly tool (C) to insert the LED.
C
5. Wipe the bulb of the halogen lamp with a clean cloth.
6. Unscrew the cap from the quick coupling.
7. Check the light function of the quick coupling.
If the LED does not light up:
8 Maintenance
61