Publicidad
Idiomas disponibles
Idiomas disponibles
Quick operation guide
PRO LIFTS S.L.
3.11 - Do not use stepladders on the lift or use it as a
support for them.
3.12 - Before using the lift, check the condition of the
cable. The cable should not have broken threads or
show any signs of crushed/fl attened areas. NEVER use
faulty cables, always change them if there is any doubt.
Only use VMB steel cables; reference: DIN 3060.
Quality: 180KG/mm and torsion resistant.
3.13 - All sections must be lowered fi rst, and the legs
placed in its transport position, before transportation.
3.14 - Do not grease or lubricate the winch's braking
mechanism. The brake disks have been greased with
a special heat and pressure resistant solution. Other
products should not be used to avoid negative effects
regarding the braking mechanism.
3.15 - The minimum load to avoid problems regarding
the braking mechanism is 25Kg. Without this load the
brake will not work.
3.16 - NEVER take apart the crank of the winch when
the lift is carrying a load or extended.
Depósito legal y copyright 2014. Todos los derechos reservados.
ENGLISH
8
Publicidad
