Technical Specifications - Speedheater 1100 S Manual De Instrucciones

SH IR Paint Remover
Angle support
Instruction &
Safety Manual
ON/OFF switch
Angle support
Reset button for
anti-overheat function
ID # 000000
Serial number
Protective plates
Accessories
attachment point

TECHNICAL SPECIFICATIONS

Speedheater Infrared Paint Remover, model 1100 S
This tool is made in Sweden by Speedheater System AB.
US Patent No. 008442391B2.
ELECTRIC PAINT REMOVER
3 6 E R
Connection
1 phase standard grounded outlet.
Volts Watts Amps
120 1100 9.2
Anti-overheat function
The anti-overheat feature only protects the components of the tool from being overheated.
It does not monitor the temperature of the substrate or protect against fire hazards.
Dimensions
Storage Box IR Paint Remover
Total length : 20" Total
W idth : 10 1/4" W idth
H eight : 9 1/2" H eight
Approx. Weight
Optimum exposure time for paint removal applications
Indoors 20 to 30 seconds.
Outdoors 20 to 40 seconds.
The paint is ready to be scraped off when it is both bubbling and smoking simultaneously.
Operating Temperature
o
Approximately 200 - 400 F (100-200°C) when used as described in the instructions. Heating for longer than
recommended increases the temperature and may thereby constitute a fire hazard, exposure to lead vapor and
other vapors that may cause severe personal injury.
in accordance with EN 60335-1, EN 60335-2-45 standards.
Cord
16 gauge 3 wire, 8 feet long.
Heating surface
length : 14 1/2" L ength
: 6 3/4" W idth :
: 6 3/8"
:
4 lb 3 oz.
: 12 1/4"
4 7/8"
9