Tabla de contenido
Publicidad
EN
A
• Before continuing, make sure that the skimmer flap is well positioned.
• Mark the position of the fixing screws on the liner with a felt-tip pen.
• (B) Position the second rectangular flat seal (5.1) and the flange (8) against the liner, aligning the holes with the position marks of the screws.
• Fix the flange (6) on the liner with 18 screws (7) starting at the bottom(C). The pressure of fixing points on the liner should be constant, (fixing in cross
• Screw slightly at first to make sure they fit properly, then fully tighten them, following the order indicated in (C)
• Press on the trim cover No. 9, taking care to place the level mark in the correct position (D).
• Use Teflon to bolt the hose adapter (11) to the lower hole of the skimmer body, and then connect the suction hose and tighten with a clamp. (E)
• Cut the liner with a cutter from the inside of the skimmer.
• Now you should install the filter.
13
11
D
1
3
SKIMMER
8
6
5
8
10
7
11
9
B
8
1
9
7
9
1- Skimmer cover
2- Suction cover
3- Basket
4- Gate unit
5- Connection seal
6- Conical opening
7- Bag of screws (26 DIN 7982 5,5X25 and 10DIN 7982 4,8X19)
8- Gasket
12
9- Flange with trim cover
10- Return valve
11- Winter storage plug
12- Key
13- Hose adapter
E
99
C
17
15
13
12
14
16
18
10
8
6
4
2
1
3
5
7
Look for us in our YouTube
channel to help you with
the assembly.
11
9
Publicidad
Tabla de contenido
