Corghi ERCO 500 Manual De Uso página 49

4.3 OPERATION
Platform lifting is carried out by the hydraulic unit which acts upon the primary cylinders.
The platforms are raised simultaneously owing cross feeding of the hydraulic cylinders
( Figure ).
Lowering, even though electrically controlled, is carried out by the weight of both the
platforms and the load lifted.
The hydraulic system is protected by a max pressure control valve thus preventing
pressure from exceeding the maximum fixed safety limit.
Lifting and lowering motion of the lift is controlled by the push buttons on the control
desk panel
Whenever the lift has to be lowered to the ground and the DOWN button is pressed, the
descent is accompanied by an acoustic signal.
In this way, the operator must verify that neither persons nor objects are within the safety
area.
49