Introduction; Technical Features; Options - AERMEC Novatherm TRS251 Manual De Instrucciones

EN

INTRODUCTION

The TRS heat recovery units feature compact dimensions and easy assembly.
The TRS heat recovery units combine maximum room comfort with certain energy savings.
Current air-conditioning and air handling systems require forced ventilation, which consequently involves the discharge of the
conditioned air and as a result means significant energy consumption and an increase in running costs.
The TRS series has been designed to resolve these probles by the use of static exchangers.
The TRS series adopts an heat recovery made of plane sheets of special paper.
The drain pan collector is not present because the humidity contained in one of air flows is partially absorbed by the porous
surface but then completely transferred to the opposite flow: therefore the humidity condensation is avoided.
The high static pressure values available allow the use of ducting for the extraction or distribution of air in a series of rooms.

TECHNICAL FEATURES

•
Air-to-air enthalpy heat recovery device, thermal efficiency up to 76%
•
Galvanized steel self-supporting panels, internally and externally insulated; accessibility from side door
•
Air filtering in efficiency class ISO16890 ePM
50% filter on recovery flow.
•
Integrated pressure switch for dirty filter signal Motorised heat recovery by-pass device, automatically controlled by unit control
to use fresh air free-cooling when convenient
•
Low consumption high efficiency & low noise direct driven fans with 10-speed EC motors
•
Built-in electrical panel with electronic board for controlling the ventilation and free-cooling functions and offering an interface
via the Modbus protocol for supervising the operating parameters.

OPTIONS

•
Touch screen controller - TRSPTS
•
CO wall mount sensor - TRSQSW
2
• Humidity wall mount sensor - TRSUSW
31
95% (F9 EN 779) with COARSE 50% pre-filter (G3 EN 779) on fresh air and COARSE
2.5
TRSPTS TRSQSW
TRSUSW