AERMEC Novatherm TRS251 Manual De Instrucciones página 45

EN
8.
Setting the time band clock: keep the SET key pressed for 6 seconds to enter the time band clock setting mode. In this
interface, briefly press the MODE key to change from time setting to day setting, ON for time bands, OFF for time bands.
Every single day of the week has two time bands called 1 and 2, it is possible to set a different programming for each
single day using one or two time slots (or none if no programming is desired).
A. Time setting:
from the time setting interface, press SET briefly. "Hour" will flash. Press the ▲ and ▼ keys to change the "hour". After setting
"hour", press MODE to pass to the "minute" setting. "Minutes" will flash. Press the up and down keys to change the "minutes".
After setting the time, press SET to save and return to the main interface.
ON
B. Day setting:
From the day setting interface, press SET briefly. Press the ▲ and ▼ keys to select the required day. Press SET to save and return
to the main interface.
45
Time setting
A
ON setting for
time bands
C
Hour Setting
Day setting
B
OFF setting for time
bands
Minute Setting
ON
Day Setting
D