Introduction; Product Description; Specifications - Stryker 4701 Manual De Uso

INTRODUCTION

This manual is designed to assist you with the operation of the LD304 Birthing Bed. Read it thoroughly before
using the equipment or beginning any maintenance on it.

PRODUCT DESCRIPTION

This product is an electrically operated maternity bed designed for general patient care use. Major functions
include: raising and lowering of the litter, raising and lowering of the head and foot end portions and Trendelen-
burg−like function.

SPECIFICATIONS

Safe Working Load
Weight of Product
Bed Length/Width
Bed Height (to top of seat)
Mattress Size
Caster Size
Critical Angles
Foot Section Height
Break−Away Point from Wall
Electrical
Rated Duty Cycle
Environmental Conditions
Temperature
Relative Humidity
Atmospheric Pressure
Stryker reserves the right to change specifications without notice.
Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations
Introduction
500 pounds (227 kilograms)
475 pounds (215 kilograms) ; standard configuration
525 pounds (238 kilograms) ; all options/accessories
93" x 41" (with siderails up) − 37" (with siderails down)
236 cm x 104 cm (with siderails up) − 94 cm (with siderails down)
Low − 17.5" (44 cm), High − 35.5" (90 cm) (w/6" Casters)
Head − 49.5" (126 cm) x 33" (84 cm) x 5" (13 cm), Foot − 30" (76 cm) x
30" (76 cm) x 3" (8 cm), Patient Sleep Surface − 81" (206 cm)
6" Standard; 8" Optional
Maximum Elevation − Head 70_, Trendelenburg 8_
Foot Section Travel − 0" (0 cm) Up / 7" (17.8 cm) Down
60" (152 cm)
Standard 4 motor function: Head−Bed−Foot−Trendelenburg
120 VAC, 60 Hz, 10 Amp
Optional: 230 VACY, 50/60 Hz, 10Amp
Current leakage less than 300 microamperes (per UL 60601−1).
Hospital grade plug and 3−wire heavy duty cord.
Compatible with non−flammable anesthetic agents and oxygen by nasal
catheter or mask type.
5% / hr (Continuous Operation with Short−Time Loading)
Operation
1−2
Storage and Transportation