Cavist 46 Manual De Usuario página 4

Electrical Safety
THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED
SOCKET
Before switching on, make sure that the voltage of your
•
electricity supply is the same as that indicated on the
rating plate. This product is designed to operate on 230
– 240V AC; 50Hz. Connection to any other power source
may damage the unit.
This product may be fitted with a non re-wireable plug. If
•
it is necessary to change the fuse in the plug, the fuse
cover must be refitted. If the fuse cover becomes lost or
damaged, the plug must not be used until a suitable
replacement is obtained.
If the plug has to be changed because it is not suitable
•
for your socket, or becomes damaged in any way, this
should be carried out by a qualified electrician. The plug
removed must be disposed of safely, as insertion into a 13
Amp socket is likely to cause an electrical hazard.
Transportation and Handling
For safe lifting, tilt the appliance backwards by no more
than 45 degrees, hold the base and rear corners of cabinet.
Lift the cooler carefully. Never use the door handles for
lifting. To move the cooler on a flat level surface, tilt it
slightly backwards and push backwards.
This unit is heavy and could cause injury – ensure there are
adequate people present to move the appliance.