Handle Installation - Cavist 46 Manual De Usuario

Important: The vent at the base of the appliance is for ventilation. Nothing should be placed in front of this
vent; otherwise your wine cabinet may not operate properly.
• A decorative plinth can be fitted to the front of the base vent as long as the cut out shown in the diagram
below is made in the plinth. This cut out is required whether the vent is removed or

HANDLE INSTALLATION

To install the door handle follow the below steps:
1. Open the door of the appliance and move the door gasket slightly to one side so that you can see two
designated holes for handle installation
2. Install the handle tightly as shown in the diagram above with the two screws provided.
3. Ensure the door gasket falls back into place and that the door opens and closes correctly.
not.