Important Safety Instructions - Ryobi P640K Manual Del Operador

IMPORTANT SAFETY INSTRUCTIONS

WARNING:
READ THESE INSTRUCTIONS. Failure to follow all in-
structions listed below, may result in electric shock, fire
and/or serious personal injury.
READ ALL INSTRUCTIONS
 Know your chemical sprayer. Read and understand
the operator's manual and observe the warnings and
instruction labels affixed to the tool.
 Do not operate the product in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
 Do not allow bystanders or children in the area while
operating this product. Exposure to some chemicals
can be hazardous.
 This product is suitable for indoor and outdoor use.
 Stay alert, watch what you are doing and use common
sense when operating this product. Do not use while
you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating
this product may result in serious personal injury.
 Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
 Use safety equipment. Always wear eye protection
with side shields or goggles and a dust mask. Protect
eyes, skin and lungs against drifting spray and during
mixing, filling, and cleaning.
 Do not overreach. Keep proper footing and balance at
all times. Do not use on a ladder or unstable support.
Stable footing on a solid surface enables better control
of the product in unexpected situations.
 Do not use the product if the switch does not turn it
on and off. Any product that cannot be controlled with
the switch is dangerous and must be repaired.
 Store the product out of the reach of children and do
not allow persons unfamiliar with the product or these
instructions to operate the product.
 Keep the sprayer and its handle dry, clean and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean your tool.
Following this rule will reduce the risk of loss of control
and deterioration of the enclosure plastic.
 Use this product in accordance with these instructions
and in the manner intended, taking into account the
working conditions and the work to be performed.
Use of the product for operations different from those
intended could result in a hazardous situation.
 Avoid accidental starting. Ensure the switch is in the
off position before inserting battery pack. Inserting the
battery pack into products that have the switch on invites
accidents.
 Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
 Use the product only with specifically designated bat-
tery packs. Use of any other battery packs may create
a risk of injury and fire.
 Use battery only with charger listed. For use with 18V
nickel-cadmium and 18V lithium-ion battery packs, see
tool/appliance/battery pack/charger correlation supple-
ment 987000-432.
 When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, ad-
ditionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
 Have this product serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
 When servicing the product, use only identical replace-
ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance instructions may create a
risk of shock or injury.
3 — English