General Safety Instructions - Grizzly ERV 1400-35 Manual De Instrucciones

GB
Safety instructions
This section covers the basic safe-
ty instructions when working with
this implement.
Symbols / Instructions on
the implement
WARNING!
These Instructions must be
read!
Danger of injury due to
flung-out material! Keep
bystanders well away from
the implement..
Danger of electric
shock if the power
cable is damaged!
Always ensure that the
power cable is kept
well away from the im-
plement and its cutting
tools!
CAUTION – Sharp tools:
Ensure that the hands and
feet are kept well away from
the cutting tools. The cutting
cylinder continues to rotate
briefly after the motor has
been switched off!
Always disconnect the plug
from the mains prior to
maintenance work or if the
power cable is damaged!
Caution with steps! Turn
off the power when the
implement is to be car-
ried across steps!
48
Noise level ratings L
dB(A).
Protection Class II
Electrically powered imple-
ments must not be disposed
of with the domestic waste.
Working width
Read the Operating In-
structions before set-
ting up for work.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage..
Help symbols with informa-
tion on improving tool han-
dling.

General safety instructions

This implement can cause
serious injuries if it is not
properly used. Please read
these Operating Instructions
carefully and familiarize
in
WA