LaserLiner SmartCross-Laser Manual De Instrucciones página 8

Read the operating instructions and the enclosed
brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain.
This document must be kept in a safe place and
if the laser device is passed on, this document
must be passed on with it.
The automatic cross-line laser for aligning tiles,
wall studding, windows, doors etc.
General safety instructions
– The device must only be used in accordance with
its intended purpose and within the scope of the
specifications.
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation,
they should shut their eyes and immediately move away
from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to
look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered
whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers
and partitions wherever possible and identify the laser
area with warning signs.
– Tampering with (making changes to) the laser device
is not permitted.
– This device is not a toy - keep out of the reach of children.
!
Always turn off all lasers and latch the pendulum in
place before transporting, ON/OFF switch in its „OFF"
position!
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014