Metal Grease Filter - GUTMANN Llano Instrucciones De Uso

EN
Metal filter
Removing and cleaning the filter
Fire hazard ! Grease residues decrease the
extractor's performance and increase the
fire hazard. The metal filter must be
cleaned regularly (at least every 14 days) to
prevent a fire hazard. The necessary clean-
ing of the grease filter is also shown via the
LED indicator : the red LED on the ceiling
unit lights up as of 15 operating hours.
Please clean the metal filter as soon as
possible.
Pull the stainless steel front down gently
until the magnetic contact releases. Pivot
the stainless steel front slowly. The metal
filter behind it can now be removed. The
metal filter is best cleaned in the dishwash-
er with a mild dishwashing agent. The man-
ufacturer accepts no liability whatsoever for
any discolouration caused by the use of ag-
gressive cleaning agents. Temperatures
exceeding 55 degrees must also be avoid-
ed.
Please note: Due to a galvanic reaction
during the rinsing process, the metal
grease filters must not be washed at the
same time as silver cutlery or silver dishes.
Unfortunately, there is no right of complaint
if this circumstance is not taken into ac-
count.
Caution: Do not use three-phase cleaning
agents or multiphase cleaning agents.
Do NOT clean the metal filter in an industri-
al washing machine. Cleaning with aggres-
sive agents such as petrol, acetone, trichlo-
roethylene, etc., will destroy the filters !
After cleaning, replace the metal filter and
then keep the toggle switch (F= filter satu-
ration) pressed to the right for 10 seconds.
This resets the operating hours counter and
the RED light goes out. Then lift the stain-
less steel front up again until it closes.
22
Opening the glass panel:
Reach with both hands, left and right, be-
hind the glass panel and pull the panel
down until the magnetic contact releases
(1.).
Pull the glass panel further down as far as it
will go.
Hold the metal grease filter by the removal
bolt with both hands and pull it down.
The installation of the
metal grease filter and
the closing of
glass pane is done in
reverse order.
the