Mitsubishi Heavy Industries SC-SL3NA-AE Manual Del Propietário página 17

[BASIC GROUP SETTINGS screen]
5. Press the button for the item to set or change.
· Run/Stop: Press the RUN or STOP button.
With the RUN button is selected, the operation starts, and with the STOP button is selected,
the operation stops.
· Temperature setting: press ▲ or ▼.
· Mode: select
* Auto Mode can be enabled in the Function Settings.
· Fan speed: select
can be enabled in the Function Settings.
· Air direction: select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button.
The unit operates with the maximum fan speed.
6. Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to make the setting or change, press the No button.
■ Settings/changes on the detailed group settings screen.
Prohibiting operations by remote controller settings and fi lter resets can be carried out on this screen.
Press the DETAIL SET button on the BASIC GROUP SETTINGS screen.
The DETAILS GROUP SETTINGS screen is displayed.
[DETAILS GROUP SETTINGS screen]
5. Press the button for the item to set or change.
· Run/stop, temperature setting and mode are the same as the BASIC GROUP SETTINGS screen.
· LOCK: Press
If is pressed, remote controller operations are permitted, and if
hibited.
· FILTER: if the reset button is pressed, the fi lter sign turns off.
6. Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to set or change, press the No button.
Note
• If the BACK button is pressed, it returns to the previous screen.
• If individual lock/unlock is enabled in the Function Setting, it is possible to set the remote controller opera-
tions to permit or prohibit each item such as run/stop, mode and temperature setting.
• When individual lock/unlock are enabled in the Function Setting, remote controller operations are prohib-
ited if run/stop, mode and temperature setting are all
have been permitted.)
Set a temperature between 18°C and 30°C.
Auto, Cool, Dry,
, , or , and press the button.
or .
[Auto button enabled in Function
Setting]
This function can be applied to the outdoor
6
units, which are the cooling / heating free multi
KXR, GHP-R series or later and PAC.
5
Fan or Heat by pressing the button.
Page 27
[Individual lock / unlock settings
5
enabled in Function Setting]
6
This function can be applied to the indoor units,
which are the model KXE4 or later, and to the re-
mote controller, which is the model RC-E1 or later.
. (Some functions, such as reset of the fi lter sign
– 16 –
Above
is pressed, they are pro-