Step-By-Step Use - Program 2-5 - DJO Global Cefar Femina Manual De Instrucciones

STEP-BY-STEP USE – PROGRAM 2–5
1. INSERT THE BATTERIES
42
Insert the batteries (see chapter REPLACEMENT OF BATTERIES).
2. ATTACH THE ELECTRODES
A. Connect the electrodes to
the cable.
3. SWITCH THE STIMULATOR ON
Press the ON/OFF button
minating the stimulation at all times, even when the key lock is acti-
vated.
Always switch the stimulation off before removing electrodes from
the skin.
4. SELECT A PROGRAM (2-5)
Press the PROGRAM button
your choice is shown on the display.
Note! When selecting programs the amplitude must be set to 00.0
mA for both channels.
For further information on the programs, see chapter PROGRAM GUIDE.
5. START THE STIMULATION
Press the INCREASE button
reach a comfortable level of stimulation (see Recommended
intensity in chapter PROGRAM GUIDE). Press and hold the but-
ton to increase the amplitude continuously.
Note! Always increase the amplitude cautiously!
B. Attach the electrodes to
your body.
. This button can be used for ter-
AUTO AUTO
S
P
AUTO AUTO
repeatedly until the program of
S
P
for each channel until you
AUTO AUTO
P S
C. Connect the cable(s) to the
CEFAR FEMINA.