Switching The Appliance On And Off - Angelo Po 0N1FR1GD Manual De Uso

Lighting
Operate the appliance's master switch to con-
1)
nect it to the electrical mains.
The mains light (P) comes on.
Turn on the gas supply tap.
2)
Press key (B) to set the appliance in "stand-by"
3)
mode.
The mains power on light (P) goes out and
the display (A) shows the screen shown here.
Open the hatch (E).
4)
Press and turn the knob (L) anti-clockwise (pos.
5)
3) to turn on the pilot light. Hold the knob
down for approximately 15 sec to start up the
thermocouple.
Press and turn the knob (L) anti-clockwise
6)
(pos. 4) to turn on the burner.
Close the hatch (E).
7)
Press the key (B) to switch on the appliance
8)
and start the cooking cycle.
The cooking temperature set will appear in red
on the display(A).
Turning off
Keep the key (B) pressed for about 6 secon-
1)
ds to stop the cooking cycle and switch the
appliance off .
The mains light (P) goes out.
Open the hatch (E).
2)
GB
Press the knob (L) and turn it clockwise (pos.
3)
5) to turn off the burner.
The pilot light will remain on to allow the
burner to be re-lit.
Press the knob (L) and turn it clockwise (pos. 6)
4)
to turn off the pilot light.
Turn off the gas supply tap.
5)
Close the hatch (E).
6)
Cut off the mains electricity supply using the
7)
appliance's master switch.
3301390_ut_GB_rev.1

SWITCHING THE APPLIANCE ON AND OFF

B
P
C
3
B
6
- 12 -
A
F G D
4
E
5
ENGLISH
L