Fitting T-Slot Style Adapters; Technical Data - Blatchford KX06 Instrucciones De Uso

14 Fitting T-Slot Style Adapters

If fitting a T-slot style adapter:
1. Remove knee pad as described in
Section 13.
2. Unscrew two M3 x 8 hex socket set screws
(see figure right) until the T-Slot opening is
unobstructed.
3. Slide adapter into T-slot.
4. Screw in the two M3 x 8 screws until tight
against the chassis to prevent the adapter
from sliding out of the T-slot.
Do not overtighten screws.
5. Refit knee pad as described in Section 13.

15 Technical Data

Operating and Storage Temperature Range:
Component Weight:
Activity Level:
Maximum User Weight:
Maximum Flexion Angle:
Proximal Alignment Attachment:
Distal Alignment Attachment:
Build Height (see Diagram):
220 mm
16
Avoid over-tightening the screws
after fitting T-slot adapter
Chassis
T-Slot
Opening
M3 x 8 mm
Hex Screws
(x 2)
1.5
910394
Unscrewing T-Slot Screws Before Fitting Adapter
Level 3: 150 kg (330 lb)
Level 4: 145 kg (320 lb)
Blatchford male pyramid
220 mm (8.7 inches)
-10 ˚C to 50 ˚C
(14 ˚F to 122 ˚F)
1.34 kg (2 lb 15 oz)
3–4
160 °
4–bolt interface
T–slot interface
30 mm
938409/2-0520