Using The Harness - Oregon PS250 Manual De Instrucciones

OPERATING THE POLE SAW
FOOTING
Stand with both feet on solid ground,
with weight evenly spread between
them
Hold the pole saw as close as possible to
the body to maintain control (Fig 22)
FIG. 22

USING THE HARNESS

The harness helps to balance the pole
saw and distribute the weight of the pole
saw across the body, increasing comfort
for extended use
This harness is equipped with a quick-
release that can be operated with one
hand (Fig 23)
FIG. 23
24
OREGON® Cordless Tool System
POLE SAW MODEL PS250
• Wear the harness over the head and the
shoulder opposite the trigger hand
• Adjust the strap length so that the clip
is about the same height as the hip
(Fig 24)
FIG. 24
• Place the pole saw on a flat surface with
the harness loop facing up
• Attach the harness clip to the harness
loop (Fig 25)
FIG. 25
ADJUSTING THE SHAFT LENGTH
The pole saw features an extendable
shaft that allows greater reach into taller
trees
For ease of use, extend the shaft only
as much as necessary to reach the work
safely
• Turn off the pole saw and remove the
battery pack
AE 0414 - F/N 563398