Jole tilt Manual De Instrucciones página 10

Idiomas disponibles

Correctly assembled vehicle belt is shown in

Waist belt pass through the rear-facing vehicle waist belt

slots, as shown in

Shoulder belt must pass through the rear-facing

vehicle shoulder belt slots, as shown in

The vehicle buckle tongue is engaged with the buckle

correctly, as shown in

Securing your Child in the child restraint

see images

Note

1. Child 0 - 6 months must use the infant body support.

2. Please install the child restraint on the vehicle seat first, and

then place the child in the child restraint.

3. After the child is placed in the seat, check whether the

shoulder harness straps are at the proper height. Please

refer to

Shoulder Harness Straps Height

1. Pull up the webbing adjuster, while pulling out the shoulder

harness straps to the proper length.

- 1

Webbing adjuster

2. Press the red button to disengage the buckle

leave the harness straps on the left and right sides of the child

restraint.

3. Place the child in the child restraint and pass both arms

through the harness straps.

After the child is seated, recheck whether the shoulder

harness straps are at the proper height. Please refer to

Proper Position of the Shoulder Harness Straps

Harness Straps Height Adjustment

4. Engage the buckle until it clicks.

5. Pull down the adjustment webbing and adjust it to the

proper length to make sure your child is snugly secured.

Make sure the space between the child and the

shoulder harness straps is about the thickness of one hand.

Proper Position of the Shoulder Harness Straps

Adjustment.

1, and then

Shoulder

Tabla de Contenido