Rearward-Facing Installation - Jole tilt Manual De Instrucciones

Rearward-Facing Installation

see images -
13 24
13
14
1
1. Pull out the vehicle belt and engage the vehicle buckle
tongue into the buckle.
13
- 1 Vehicle shoulder belt
13
- 2 Vehicle Waist belt
13
2. Rotate the child restraint rearward and thread the vehicle
waist belt through the two rear-facing vehicle waist belt slots
underneath the shell.
14
- 1 & - 2 Vehicle belt slot
14 14
The correctly assembled belt is shown in
13
1
2
2
.
15
15
3. Install the vehicle shoulder belt
in the two rear-facing vehicle
shoulder belt slots at the back
of the seat shell.
16
!
Shoulder belt must pass
through the rear-facing
shoulder belt slots.
4. Take the locking clip out of the
bag.
17
16
17
14