Maintenance / Spare Parts; Electrical Circuit; Dismantling The Unit; Spare Parts - Liebert HIROSS Hisp SE Serie Manual De Usuario/ Instalacion

9 --- Maintenance / Spare parts

For safety reasons, if possible, cut the unit out, by oper-
ating the QS1 switch before carrying out any mainte-
nance.
Maintenance programme --- Monthly check
FANS
AIR FILTERS

ELECTRICAL CIRCUIT

REFRIGERATING CIRCUIT

9.1 --- Dismantling the unit

The machine has been designed and built to ensure a
continuing operation. The working life of some of the
main components, such as the fan and the compressor,
depends on their maintenance.
If the unit has to be dismantled, this must be done by
skilled refrigerator technicians.
The refrigerating fluid and the lubricating oil, con-
tained in the circuit, must be collected according to the
laws of your Country.
The Maintenance Programme described below should
be carried out by a skilled technician, preferably work-
ing under a maintenance contract.
Check that the fan motor rotates freely without any abnormal noise, and en-
sure that the bearings are not running hot.
Also check the current absorption.
Check the state of the filter; if necessary clean or replace it.
To replace it:
S remove the lower panel of the unit
S extract the filter from its seat vertically
S fit the spare part
S close the panel
In very dusty environments perform this check more frequently.
S Check the power supply on all phases.
S Ensure that all electrical connections are tight.
S Check the evaporating pressures (to be done by an expert technician).
S Check the compressor current absorption, its head temperature and the
presence of any unusual noise.
S Ensure that there is no ice formation on the evaporator.

9.2 --- Spare parts

It is recommended the use of original spare parts.
When placing an order refer to " Component List"en-
closed with the machine and quote the unit model no.
and serial no.
13
English