Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FREE WARNINg LABEL REPLACEMENT
If your warning labels become illegible or are missing, call 1-800-223-7278 for a free replacement.
HOT SURFACE. KEEP AWAY
FROM CURTAINS AND
OTHER COMBUSTIBLE
MATERIALS. TO REDUCE
THE RISK OF FIRE, USE
MAX 25 WATT 120 VOLT,
TYPE S BULB. DO NOT
USE STANDARD
HOUSEHOLD BULB.
DELTA Machinery, Anderson, SC 29626
Made in China / Hecho en China / Fabriquée en Chine
TO REDUCE THE RISK OF
INJURY, USER MUST READ
TOOL INSTRUCTION MANUAL
BEFORE OPERATING
PRODUCT. FOR USE WITH
40-690 SCROLL SAW.
FASTEN TOOL TO STAND
BEFORE USE. TIGHTEN ALL
FASTENERS COMPLETELY
BEFORE USE. MAXIMUM
LOAD - 150 LBS (68 KG). DO
NOT CLIMB, SIT OR STAND
ON SAW STAND. DO NOT
USE STAND ON UNEVEN OR
UNSTABLE SURFACE.
SERVICE ANd REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about DELTA
its factory-owned branches, or to locate an Authorized Warranty Service Center, visit our website at www.DeltaMachinery.com
or call our Technical Service Manager at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against
defective material and workmanship. We cannot guarantee repairs made or attempted by others. By calling this number you
can also find answers to most frequently asked questions 24 hours/day.
You can also write to us for information at DELTA
38305 - Attention: Technical Service Manager. Be sure to include all of the information shown on the nameplate of your tool
(model number, type, serial number, date code, etc.)
Since accessories other than those offered by dELTA
of such accessories could be hazardous. To reduce the risk of injury, only dELTA
be used with this product.
A complete line of accessories is available from your DELTA
Authorized Service Stations. Please visit our Web Site www.DeltaMachinery.com for a catalog or for the name of your
nearest supplier.
SUPERFICIE CALIENTE.
SURFACE CHAUDE. GARDER À
MANTÉNGALA ALEJADA DE
L'ÉCART DES RIDEAUX ET
CORTINAS Y OTROS MATERIALES
D'AUTRES MATIÈRES
COMBUSTIBLES. PARA REDUCIR EL
COMBUSTIBLES. POUR RÉDUIRE
RIESGO DE INCENDIO, UTILICE
LE RISQUE D'INCENDIE, UTILISER
UNA BOMBILLA TIPO S DE 25
UNE AMPOULE DE TYPE S, DE
25 W MAX. ET DE 120 V. NE
VATIOS MÁX. Y 120 VOLTIOS NO
UTILICE UNA BOMBILLA
PAS UTILISER D'AMPOULE
ESTÁNDAR DE USO DOMÉSTICO.
DOMESTIQUE STANDARD.
MOD. 40-691
Scroll Saw Stand
Soporte de Sierra Caladora
Support de Scie à découper
PARA REDUCIR EL RIESGO DE
AFIN DE RÉDUIRE LE RISQUE DE
LESIONES, EL USUARIO DEBE LEER
BLESSURES, L'UTILISATEUR DOIT
EL MANUAL DE INSTRUCCIONES DE
LIRE LE MODE D'EMPLOI AVANT
LA HERRAMIENTA ANTES DE
D'UTILISER LE PRODUIT. UTILISER
OPERAR EL PRODUCTO. PARA USO
AVEC LA SCIE À DÉCOUPER
CON LA SIERRA CALADORA 40-690.
40-690. FIXER L'OUTIL AU SOCLE
ASEGURE LA HERRAMIENTA A LA
AVANT SON UTILISATION. BIEN
BASE ANTES DEL USO. AJUSTE
SERRER TOUTES LES ATTACHES
COMPLETAMENTE TODOS LOS
AVANT D'UTILISER L'OUTIL.
SUJETADORES ANTES DEL USO.
CHARGE MAXIMALE : 68 KG (150 LB).
CARGA MÁXIMA: (68 KG (150 LIBRAS).
NE PAS GRIMPER, S'ASSEOIR OU
NO SE SUBA, SIENTE NI PARE SOBRE
SE TENIR DEBOUT SUR LE SOCLE
LA BASE DE LA SIERRA. NO UTILICE
DE LA SCIE. NE PAS UTILISER LE
LA BASE SOBRE UNA SUPERFICIE
SOCLE SUR UNE SURFACE
DISPAREJA O INESTABLE.
INÉGALE OU INSTABLE.
Power Equipment Corporation, 4825 Highway 45 North, Jackson, TN
®
ACCESSORIES
12
TO REDUCE THE RISK OF ELECTRIC
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT CONNECT TO AN
SHOCK, DO NOT CONNECT TO AN
UNGROUNDED SUPPLY.
UNGROUNDED SUPPLY.
PARA REDUCIR EL RIESGO DE
POUR RÉDUIRE LE RISQUE DE CHOCS
DESCARGA ELÉCTRICA, NO
ÉLECTRIQUES, NE PAS BRANCHER À
CONECTE A UN SUMINISTRO SIN
UNE SOURCE D'ALIMENTATION NON
CONEXIÓN A TIERRA.
MISE À LA TERRE.
DELTA Machinery, Anderson, SC 29626
have not been tested with this product, use
®
recommended accessories should
®
Supplier • DELTA
Factory Service Centers, and DELTA
®
®
Power Equipment Corporation,
®
®
Publicidad
Tabla de contenido
