Operation - Delta 40-695 Manual De Instrucciones

ATTACHINg WORKLIgHT (40-692)
This scroll saw worklight is designed for use with your
40-695 Scroll Saw only. Do not use the light with any
other tool.
FOLLOW THESE RULES WHEN USINg
THE INCLUdEd LIgHT:
• T o reduce the risk of fire, use 25 watt (maximum)
120 volt appliance bulb with a candelabra base.
Do not use a standard household bulb.
• Bulb may become hot during use.
• H andle worklight with care around any flammable
surface.
• I f bulb has been lit, let worklight cool for several
minutes before changing bulb.
• E nsure worklight does not interfere with any
scroll saw operation.
ASSEMBLY
Using the star wrench provided with the worklight,
remove the two screws - M6 x 12 mm (0.47") - shown in
Figure 7A. (These screws are opposite the motor.) Using
the same screws, mount the worklight into the two holes
in the scroll saw housing, as shown.
Rotate the light switch clockwise to turn the light OFF and
ON.
OPERATIONAL CONTROLS ANd AdjUSTMENTS
STARTINg ANd STOPPINg SCROLL SAW
To reduce the risk of injury, make
sure that the switch is in the "OFF" position before
plugging cord into outlet. do not touch the plug's
metal prongs when unplugging or plugging in the
cord.
To turn the scroll saw on, press the front of the switch
(A) Fig. 8. The saw locks on automatically. To turn the
tool off, press the back of the switch (A). A hole (B) is
provided in the switch for insertion of a padlock to lock
the saw off (Figure 8).
LOCKINg SWITCH IN THE "OFF" POSITION
IMPORTANT: When the machine is not in use, the
switch should be locked
in the "OFF" position to prevent
unauthorized use, using a padlock with a 3/16" (4.76 mm)
diameter shackle through hole (B) Fig. 8.
To reduce the risk of injury, in the event
of a power outage (such as a breaker or fuse trip),
always turn the tool "OFF" and unplug until the main
power is restored.

OPERATION

A
B
9
FIg. 7A
C
FIg. 8