Yakima Hi-Lift Jack Bracket Manual De Instrucciones página 2

carries all Hi-lift
apply
two scuff
pads to each
bracket.
INSTALL FIRST BRACKET AT REAR OF VEHICLE.
(rear of vehicle)
• Place 2 spacer blocks
on the second vertical
support tube from the
rear of the basket.
• Place bracket over
blocks.
FOR THE REMAINING HOLE...
• Insert bolt, with lock
washer, and flat washer.
1033017D-2/12
brand jacks, and mounts outside Yakima's loadwarrior, or Megawarrior baskets.
®
USING SECOND HOLE IN BRACKET...
• Insert bolt with
washer into
backing plate.
• Secure with
washer and nut.
• TIGHTEN.
Add another
flat washer and
coupling nut.
(BAckING PLAtE)