__NAS279803_Dampfbuerste_B5.book Seite 47 Donnerstag, 23. Juni 2016 10:35 10
8. Storage
1. Set the temperature controller 4 to
MIN.
2. Pull out the mains plug 10.
3. Allow the device to cool down.
4. Open the cover 2 over the filler open-
ing 3.
5. Pour any remaining water out of the
water tank 1 through the filler open-
ing 3.
6. Store the steam brush by hanging it up
on the eyelet 9.
9. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Possible causes /
Fault
• Connect the device to
the mains power supply.
No function
• Use the temperature
controller 4 to turn up
the temperature.
• Fill the water tank 1.
• Select a setting for the
temperature control-
Little or no
ler 4 between
steam
and MAX. The control
lamp goes on.
• Descale the device.
Steam jet is
not working.
10. Disposal
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
Action
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
Possible causes /
Fault
Action
• Fill the water tank 1.
• Select a setting for the
temperature control-
ler 4 between
and MAX.
• It may be necessary to
press repeatedly to trig-
ger the first jet of
steam.
• Leave a pause of a few
seconds between steam
jets.
47
GB