Parts And Components; Before Use - cecotec Cumbia POWER ESPRESSO 20 MATIC Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 1
1. Espresso button
2. Double espresso button
3. Manual control
4. Power button
5. Steam button
6. Removable grid
7. Drip tray
8. Water tank cover
9. Water tank
10. Steam dial
11. Coffee maker's main body
12. Steam tube holder
13. Steam tube
14. Measuring spoon and tamper
15. Portafilter
16. Filter grip
17. Filter holder
18. Filter for 2 coffees
19. Filter for 1 coffee
20. Cup-warmer tray

2. BEFORE USE

Warning:
Remove all packaging material.
Inspect all parts of the appliance for visual damage. Unwind the power cord completely and
inspect it for damage. Do not use the appliance if it or its cord have been damaged or are not
working properly. In case of damage, contact the official Technical Support Service of Cecotec
for advice, repairs or returns.
Pour water into the water tank, the water level should not exceed the "MAX" mark in the tank.
Close the water tank lid.
Connect the appliance's power cord to the power supply and press the ON/OFF button. The
light indicator will turn on.
Press the manual control button in order to activate the water pump. The water pump will
automatically start pumping water to the coffee machine, where it will start heating.
The machine will start warming up and the light indicator will start flashing until the preheating
01509_Cumbia Power Espresso 20 Matic _Manual_YV_02020218.indd 35 01509_Cumbia Power Espresso 20 Matic _Manual_YV_02020218.indd 35
ENGLISH
POWER ESPRESSO 20 MATIC
35
18/2/20 17:00 18/2/20 17:00