Rs232 Output; Basic Information; Normal Output; Continuously Output Protocol - Baxtran BR20 Manual De Usuario

User's Guide
The battery should be charged for 12 hours for full capacity.
Just under the quantity display is an LED to indicate the status of battery charging. When the scale is plu-
gged into the mains power the internal battery will be charged. If the LED is green the battery has a full
charge. If it is Red the battery is nearly discharged and yellow indicates the battery is being charged.
As the battery is used it may fail to hold a full charge. If the battery life becomes unacceptable then contact
your distributor.
The BR30 can be ordered with an optional RS232 output.

9.1. BasIC INforMatIoN

Specifications:
RS232 output of weighing data.
ASCII code.
7/8 data bits.
Parity setable.
Baud rate from 600bps to 9600bps.

9.2. NorMal oUtPUt

Data format for normal weighing operations, parts counting or recalling of totals from memory will all be
different.
Examples follow:
Normal output
S/N The number increments every time a new value is stored in memory.
GW GW for gross weight, NT for net weight and a unit of weight
<If>
Includes 2 line feeds.
<If>
When recalling the total weight stored in the accumulation memory the output format is:
****************
<If>
Total No:
Total wt:
****************

9.3. CoNtINUoUslY oUtPUt ProtoCol

con1: weighing mode
| 1
Header
nator |
Header1: ST=STABLE, US=UNSTABLE
Header2: NT=NET, GS=GROSS
The calibration can be only done by the authorized technical personnel, please, if you wish do a calibration
contact with your authorized calibration organism who is authorized to seal and to unseal the scale.
In order to enter the calibration parameter it is necessary to short the K2 jumper K2 of the main keyboard.
Turn the power off.
28
A line of stars is shown.
Includes 1 line feed.
3 Times of the accumulation memory.
0.447kg
Weight of the accumulation memory.
, - /
| 2 |
Header

10. CalIbRaTION (ONly aUThORIzED pERsONal)

Connector: 25 pin d-subminiature socket.
Pin 2: Input.
Pin 3: Output.
Pin 5: Signal Ground.
Weight data
BR20 - BR30 model

9. Rs232 OUTpUT

k g CR LF
| | | | termi-
Weight unit