Metal Handle Assembly; Accessory Storage Bag Assembly - Craftsman CMXEVBE176560 Manual De Instrucciones

Wheel Cap Assembly (Fig. G):
8. Using a Rubber Mallet or Hammer, gently tap the
Wheel Cap onto the Right Wheel until the Wheel Cap
is firmly seated onto the Wheel. This is required on
both Left and Right Wheels.
Fig. G
Wheel
Cap
Caster Ball Assembly (Fig. H):
9. Insert the Caster Stem into the Socket of the Two Front
Caster Feet.
10. Push on the Caster until the Ball on the Caster Stem is
inserted all the way into the Socket. You will be able
to hear the Ball snap into the Socket and the Caster will
swivel easily when positioning is correct.
Fig. H
Caster Ball
Socket
Mallet
Caster Stem
Metal Handle Assembly (Fig. I)
Press and hold Release Buttons while installing Metal
Handle into Drum Handle Receptacles.
NOTE: An audible snap of Release Buttons indicates
successful engagement of the Metal Handle.
Removing Metal Handle
Press and hold the Release Buttons. While firmly pushing
in on the Release Buttons, pull Metal Handle upwards to
remove.
Fig. I
Release Buttons
Accessory Storage Bag Assembly (Fig. J)
Install Accessory Storage Bag by wrapping the Five Storage
Bag Straps around the Metal Handle and snap each Strap
in place.
Fig. J
Accessory
Storage Bag
Snaps
Accessory
Storage Bag
Strap (5)
Handle
7