Maintenance And Care - Fulbat FULLOAD F4 Manual De Instrucciones

Program 3 "12V" (14.4V/3.8A)
For charging 12V batteries with a capacity of between 14 Ah-120 Ah.
Press the program selection button 10, to select program 3. The symbol is displayed on the LCD. During charging,
the charge display 7 flashes and shows the progress of the charge procedure (1-4 bars). When the battery is fully
charged, the condition display 8 shows 4 bars. The flashing stops and the charger automatically switches to float
charge.
Program 4 "12V"(14.7V/3.8A)
For charging 12V batteries with a capacity of between 14Ah-120Ah under cold conditions or for charging AGM
batteries. Press the program selection button 10, to select program 4.
NOTE: This program may start with a minute delay. The symbol is displayed on the LCD. During charging, the
charge display 7 flashes and shows the progress of the charge procedure (1-4 bars). When the battery is fully charged,
the condition display 8 shows 4 bars. The flashing stops and the charger automatically switches to float charge.
Float charge
As described under program, this charger features the automatic float charge. Depending on the voltage drop of the
battery, caused by self-discharge, the appliance reacts with different charge currents.
The battery can remain connected to the charger for longer periods of time.
Charger protection function
The charger switches the electronics off and switches the system instantly to the basic setting, as soon as there is an
abnormal situation, such as short circuit, critical voltage drop during charging, broken circuit or swapped connection of
the connector clamps is detected. Should the charger become too hot during charging, the output current is
automatically reduced. This protects the appliance from damage.

MAINTENANCE AND CARE

Before you carry out any work on the battery charger always pull the A/C plug out of the mains socket. The charger is
maintenance-free. Ensure that all of the battery charger components are in place and in good working condition. Do
not under any circumstances use solvents or other aggressive cleaning agents. Clean the plastic surfaces of the device
with a dry cloth. Servicing does not require opening the unit, as there are no user-serviceable parts. Store the battery
charger in an upright position. Store inside, in a cool, dry place. If the battery charger is moved around the shop or
transported to another location, take care to avoid/prevent damage to the battery charger components. Failure to do
so could result in personal injury or property damage. All other servicing should be performed by qualified service
personnel.
5