Medela Invia Motion Instrucciones De Uso página 40

IEC 60601-1-2, Table 6
Recommended separation distance between portable
and mobile RF communications equipment and
The Invia Motion NPWT System
The Invia Motion NPWT System is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. Users of the Invia Motion NPWT System can help
prevent electromagnetic interference by maintaining a minimum distance between portable
and mobile RF communications equipment (transmitters) and the Invia Motion NPWT System
as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum
output power
of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance (d) in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
40
200_4169_ifu_invia_motion_patient_EN_ES_FR.indd 40
Separation distance according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz
√
d = 0.4 P d = 1.2
0.04 0.12
0.13 0.38
0.4 1.2
1.3 3.8
4 12
m
800 MHz to 2.5 GHz
√
P d = 2.3
0.23
0.73
2.3
7.3
23
√
P
17/02/15 12:08