Craftsman CMXPTSG1010NB Manual De Instrucciones página 10

6. Connect the air hose to the male plug.
Set the working pressure at 90 PSI for
best tool performance.
NOTICE: Working pressure is the amount
of air pressure the tool sees when
operating.
DISASSEMBLY
1. To remove the chisel , hold onto the
bottom hook on the retaining spring
and turn the spring counterclockwise
or you can insert a screwdriver into the
hook to help turn the spring.
2. Refer to assembly instructions to install
a different chisel .
OPERATING
1. Press the trigger
NOTICE: Always be cautious of your hands
and finger placement while tool is running.
Always disconnect air supply when not in
use to prevent accidental firing of the tool.
3
3
to start the tool.
4
3
2
2
Top
hook
Counterclockwise
4
Bottom
hook
ENGLISH
9