Plc Settings; Find A Parameter And Set Its Value; Parameter Settings - Nederman FlexPAK 800 Manual De Instrucciones

EN FlexPAK 800/1000
7

PLC settings

The following PLC displays show the different parameter settings that can be configured for
the unit.
7.1

Find a parameter and set its value

Do the following to find a parameter and set its value:
1. From the PLC status screen, press the down arrow
screen.
2.
Press 'Escape'
3.
Press the down arrow
4. Select 'Set Parameter'. Press 'OK'
5. Use the up or down arrows
6. Use the left and right arrows
7. Use the up or down arrows
8. Press 'Escape'
9. Press 'Escape
10. Press the up arrow
NOTE! There are several other input menus on the same level as the date and time screen.
If pressing the down arrow
to get to the date and time screen.
NOTE! The blinking cursor shows the current value that can be changed.
7.2

Parameter settings

To change individual parameter settings, see the PLC Settings Manual. Below are parameter
settings discussed in section '5 Use'.
28
to go to the main menu.
to go to 'Program'. Press 'OK'
to confirm.
OK
to find the parameter. Press 'OK'
to select a value.
to set the value. Press 'OK
to go to the main menu.
to go to go to the date and time screen.
to exit.
takes the PLC to one of those menus, use the left arrow
to go to the date and time
to confirm.
OK
to confirm.
OK
to confirm.
OK