Replacement Of The Burner Nozzle; Replacement Of The Pilot Light Injector - Angelo Po 0G0FR5Gl 1G0FR6G Manual De Uso E Instalación

REPLACEMENT OF THE BURNER NOZZLE

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (B) and remove the control
panel (C).

REPLACEMENT OF THE PILOT LIGHT INJECTOR

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (B) and remove the control
panel (C).
4 - Unscrew the union (D).
B
C
A
B
C
A
- 19 -
4 - Unscrew the nozzle (D) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the control panel (C) and the knobs (A)
on completion of the operation.
D
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Retighten the union (D).
7 - Replace the control panel (C) and the knobs (A)
on completion of the operation.
E
D
IDM-39618901300.tif
IT
GB
DE
FR
ES
IDM-39618901400.tif
English